Albany, NY -- (SBWIRE) -- 11/24/2014 -- Automotive electronic industry emerges after electronic information technology gets applied to the cars. From the perspective of application, automotive electronics can be divided into engine/transmission system, chassis system, body system, communication system, safety system and so forth.

This report covers airbags, tire pressure monitoring, ADAS, IVI (navigation and audio), automatic transmission, fuel injection, lighting and telematics. Meanwhile, it studies status quo, market trends, competition patterns and supply relationship of the industry, as well as analyzes financial data, operation and development strategies of major Chinese and foreign companies.

View Full Report at http://www.marketresearchreports.biz/analysis/231192

Tire Pressure Monitoring:

TPMS entered the Chinese market as the luxurious configuration of imported vehicle models. As Chinese consumers gradually put forward higher requirements on automotive safety, Chinese automobile manufacturers have applied TPMS as standard configuration; TPMS has been installed not only in luxury cars, but also in midrange cars.

In May 2014, 73 Chinese local passenger car brands set TPMS as standard configuration for 312 models and 1,567 styles. China’s automotive TPMS OEM market size was estimated to reach 2.47 million sets in 2013, representing an increase of 32.8% over 2012. In recent years, Chinese TPMS market has been growing quickly owing to the small market size, a low comparison base and the optimistic attitudes of many TPMS vendors toward the popularity of TPMS in China.

Download Detail Report With Complete TOC at http://www.marketresearchreports.biz/sample/sample/231192

Although China’s TPMS standards have been approved, mandatory installation policies have not been issued yet. We forecast that China will introduce relevant policies around 2015, and the market will see rapid development then. It is conservatively estimated that Chinese TPMS market will present a CAGR of 27.8% during 2014-2017, the OEM market size will reach 6.61 million sets by 2017, and the aftermarket size will swell swiftly as well.

ADAS

Aideddriving has been the fastest growing automotive technology over recent years, and it has entered the "Advanced Driver Assistance Systems (ADAS)" large-scale application stage. China’s ADAS market size hit USD600 million in 2013, and will amount to USD2.7 billion in 2019, with the estimated CAGR of 29% during 2013-2017.

In 2014, only about 6% of 6,079 vehicle models for sale in China are equipped with one or more sets of ADAS. Among these ADAS-contained models, imported cars account for 50%, and the ones made in China occupy the remaining 50%; however, over 80% of the ones made in China are produced by joint ventures, which means the ADAS configuration rate of domestic brands is much lower than that of international brands.

Explore All Published Reports by Research in China at http://www.marketresearchreports.biz/publisher/67

China sold 21.99 million automobiles in 2013, including 17.93 million passenger cars and 4.06 million commercial vehicles, with the ADAS preinstalled rate of about 2.5% and the overall assembly rate of 3% or so.

Fuel Injection
Automotive EFI System is divided into gasoline and diesel electronic injection system. Gasoline electronic injection system is more popular and major carmakers all have mastered the know-how of it. However, diesel electronic injection technology is monopolized by a few giants such as Delphi, Bosch and Denso.

The application proportion of Chinese heavy truck high-pressure common rail system was about 35% in 2013, and ascends quickly in 2014 as the enforcement time of National Emission Standards IV is definite. In-line pump devices complying with National Emission Standards III can not meet the requirements of National Emission Standards IV and V in terms of fuel pressure and injection control, so they need to be completely replaced by electric control high-pressure common rail injection system in the future. The application proportion of Chinese heavy truck diesel high-pressure common rail system will increase to 60% in 2015 and 80% in 2017.

According to estimates, Chinese diesel electric-control high-pressure common rail market size is expected to reach RMB6.846 billion in 2014 and RMB10.751 billion in 2017 with an AAGRof 16.23%.

Related Reports

Industrial And Commercial Hybrid And Pure Electric Vehicles 2015-2025

View Full report at http://www.marketresearchreports.biz/analysis/230523

Those selling components for electric vehicles and those wishing to make the vehicles themselves must seek where the majority of the money is spent and will be spent. That must lead them to industrial and commercial electric vehicles because today these represent 60% of the value of the electric vehicle market. Indeed, this sector is set to grow 4.2 times in the next decade. Industrial and commercial electric vehicles include heavy industrial vehicles, the term referring to heavy lifting, as with forklifts.

Download Detail Report With Complete TOC at http://www.marketresearchreports.biz/sample/sample/230523

Then we have buses, trucks, taxis and the other light industrial and commercial vehicles. There are also a few work boats and commercial boats and one day there will be commercial electric aircraft but this is really a story about the burgeoning demand for off-road industrial vehicles and on-road commercial vehicles. In particular, industrial electric vehicles make industry more efficient and commercial electric vehicles reduce congestion. Both of them greatly reduce pollution and align closely with government objectives concerning industry and the environment, yet they minimally depend on subsidy, in contrast with some other electric vehicle types.

Global And China Advanced Driver Assistance System (ADAS) Industry Report, 2014-2015

View Full Report at http://www.marketresearchreports.biz/analysis/229267

Global and China Advanced Driver Assistance System (ADAS) Industry Report, 2014-2015 focuses on the following:

Overview of automotive ADAS system, including classification of ADAS system, laws, regulations and rating requirements in major countries, consumer cognition, functions and technical solutions of main ADAS systems;
Global ADAS industry chain, covering market size, technical features and companies of sensor, chip and system integration;
Application status and competitive landscape of ADAS in the world and China, embracing installation rate and market size of ADAS systems in China and beyond, and market share of global major system integrators;
Global major suppliers of ADAS chips/solutions and system integration enterprises, covering operation and financials, ADAS technologies and relevant businesses.

Download Detail Report With Complete TOc AT http://www.marketresearchreports.biz/sample/sample/229267

Advanced Driver Assist System (ADAS) is the basis for intelligent driving and automated driving, and is also the specific application of active safety technology. ADAS can be generally divided into two categories: safety assistance and convenience/comfort assistance, with some systems integrating the pair of them.

The application of ADAS system can significantly reduce the number of traffic accidents and the severity of injuries. At present, the greatest motivation to develop and adopt ADAS comes from more stringent requirements on safe driving from governments. Developed countries, such as the ones in Europe, USA and Japan lay down stipulations on ADAS configuration in new vehicles with respect to legislation and rating requirements (NCAP), generally requiring ADAS to have functions of forward collision avoidance (FCA) and lane departure warning (LDW). The forerunner EU also puts forward requirements on automatic emergency braking (AEB), lane keeping assist (LKA) and even pedestrian detection.

Global And China Fuel Cell Industry Chain Report, 2014-2016

View Full report at http://www.marketresearchreports.biz/analysis/228472

In 2013, fuel cell shipment worldwide reached 215.3MWh, in which the biggest percentage (about 187MW) was contributed by large stationary fuel cell power station. The application of large fuel cell power station was mainly concentrated in America, S. Korea and Japan, widely for power generation, combined heat and power generation (also called cogeneration), IT data center, etc.

Download Detail Report With Complete TOC at http://www.marketresearchreports.biz/sample/sample/228472

As of 2014, the application of fuel cell in automotive industry, despite of small scale, was the most important among other fields. After two decades or more of development, the current fuel cell technology is relatively mature, and the fuel cell supply chain is gradually improving. Amid the three issues (durability, low-temperature working and cost minimization) that hinder the practicalities of fuel cell in the early stage, the former two have been addressed. In the past 3-4 years, Pt consumed by per 100kw fuel cell catalyst reduced to 30g, system cost dropped by more than 50% to USD500-1000/KW, durability was able to reach as long as over 10 years, and fuel cell start-up test at minus 30oC was completed.

About Marketresearchreports.biz
Marketresearchreports.biz is the most comprehensive collection of market research reports. Marketresearchreports.biz services are especially designed to save time and money of our clients. We are a one stop solution for all your research needs, our main offerings are syndicated research reports, custom research, subscription access and consulting services. We serve all sizes and types of companies spanning across various industries.

With a team of experienced consultants we are committed to serve our clients in a way which increase their efficiency, reduce costs and saves time. Our professional search engine helps you in finding the best and latest market research report with just one click of the mouse. Our database represents the most updates and latest market research report collections form all the leading market research publishers across the globe.