Lake Forest, CA -- (SBWIRE) -- 05/07/2010 -- Roklin Systems Inc, manufacturer of the top polyurethane products for asphalt repair, has launched the cartridge version of 'Asphalt Welder'. Coupled with a hand operated dual cartridge gun, Asphalt Welder promises to be the first choice for maintenance engineers, handymen and those looking to do asphalt repairs themselves.
Maintenance Engineers, handymen and even do-it-yourselfers can now repair minor asphalt cracks quickly and simply. Roklin Systems Inc.'s Asphalt Welder was recently released in cartridge format. Available for use with a hand-operated dual-cartridge gun, Asphalt Welder for hairline cracks can be purchased directly through Roklin's web site.
Polyurethane repair products withstand vibration, heavy traffic loads, and thermal movement Long-time users of polyurethane asphalt repair products will enjoy the ease and flexibility of the new format. Asphalt Welder adheres to and seals asphalt cracks, repairing damage and strengthening the Asphalt. The thin high-strength polymer formula flows into cracks, penetrating the damaged area. It seals and waterproofs, protecting against freeze/thaw cycles that increase cracks sizes. Rough surfaces can be smoothed out with a high-traction surface.
Sealing asphalt cracks can be done simply using Asphalt Welder in a cartridge format. Make sure the crack is clean and free of moisture. Snap cartridge into cartridge gun, attach static mixer to the tip and squeeze Asphalt Welder directly into the crack. Use a scraper or straight-edge to smooth the Asphalt Welder out. Sprinkle topping sand over repair. Wipe up any excess material and allow to dry for 30 minutes. Now the crack is filled and ready for use.
For larger cracks or when a longer working time is needed FloMix and PolyFlex DS are available. PolyFlex DS is a polymer formerly known as Dopey Soup. PolyFlex DS works well in Control Joints or Traffic loops. When greater flexibility is needed PolyFlex can be used with no added sand. FloMix can be used to fix potholes and alligatored asphalt. FlexSet and Concrete Welder are used to repair concrete potholes and cracks. Asphalt Welder can be used for asphalt repair and is also available other colors on special order.
Asphalt cartridges fit into an EHD 3337 Hand Operated Dual Cartridge Gun. It uses 3/8" case-hardened rods and cam. All three rods push the washers for added ease of dispensing product. It is supplied with a side handle for added stability which can be used on either side. Once a cartridge is installed in the cartridge gun, a static mixer can be attached to the tip of the cartridge. Roklin’s disposable static mixers are quick and efficient for one-time use.
The Static Mixer eliminates the common problem of materials setting up too quickly and clogging your equipment. The Static Mixer has mixing tubes that eliminate this problem by transporting the A and B materials separately into the mixer. To clean, simply remove the mixer, throw it away and wipe the cartridge clean.
These polymer cartridges simplify crack repair in Asphalt. More affordable than most cartridge repair products available, Asphalt Welder can be ordered directly from the Roklin Web site with no delay in delivery. With no additional tools needed, cracks can be filled simply and quickly and repairs can be opened to foot or vehicular traffic in minutes, not days. Repairs done with Roklin's polyurethane repair products are safe to apply as well as durable and long-lasting.
Asphalt Welder is available for purchase through the Roklin web site at http://www.roklinsystems.com or call 1-888-FlexSet. Other concrete and asphalt repair materials for large and small repairs are also available.