ReleaseWire

Report forecast the Aviation Market in Latin America to grow at a CAGR of 5.84 percent over the period 2013-2018.

Report forecast the Blister Packaging market in the US to grow at a CAGR of 6.11 percent over the period 2014-2019.

Report forecast the Global Cloud-enabling Technologies market to grow at a CAGR of 16.60 percent over the period 2015-2019.

Report forecast the Global Contactless Smart Card market to grow at a CAGR of 30.31 percent over the period 2014-2019.

Report forecast the Global Aerogel market to grow at a CAGR of 35.86 percent over the period 2014-2019.

Hydrogen is small the stumpy mass and is readily available in the atmosphere. Good efficiency and eco-friendly nature of hydrogen are factors driving the growth of this market across the globe. Hydrogen can either be used as a chemical or a fuel. Initially, hydrogen was only used in industries such as chemical processing, petroleum recovery & refining, metal production & fabrication, and aerospace. Hydrogen is emerging as a popular fuel, and, in turn, is expected to creat opportunities for this industry in the near future. As a fuel, hydrogen is either burned directly or used in fuel cells. Hydrogen has high calorific value which is used to generate electricity through its reaction with oxygen in fuel cells. Hydrogen fuel cells are considered to be eco-friendly as the reaction occurs in electrochemical cells, wherein the only byproduct is water.

Mammography refers to a standard diagnostic and screening technique that is used to screen breast tissues for the presence of malignant tumor. Mammography involves the use of low-energy X-rays for early detection of breast cancer. On the basis of technology used, the mammography market can be classified as film-screen or digital. Initially, conventional screen-film mammography (SFM) was the only technique available in the market, which involved high-spatial resolution for producing images. Film cassettes are used in screen-film mammography, while electronic x-ray detectors are used in digital mammography; better images can be obtained using the latter. In digital mammography, photons are converted to light, which travels to a device that converts this into a digital signal to display on a computer monitor. The global market for mammography is expected to increase at a significant rate. This is due to increasing prevalence of breast cancer cases and rising awareness about the same. The market for mammography is highly regulated. Various acts have been passed worldwide, such as the Mammography Quality Standards Act (MQSA) to ensure good quality care in mammography.

Mental health includes human psychological, emotional, and social well-being. Symptoms of mental health are divided into two groups: neurotic and psychotic. Neurotic symptoms include normal emotional experiences such as depression and anxiety or panic. Psychotic symptoms include hallucinations such as seeing, hearing, smelling, and feeling things that no one else senses. Mental health software provides patient management functionality such as maintaining patient records, treatment plans, progress note, billing, scheduling, document management, pharmacy management, and e-prescribing.

Neuropathic pain results from damage or dysfunction of the peripheral and central nervous system (CNS). Pain can develop after injury to any level of the nervous system. Some of the major syndromes include postherpetic neuralgia, painful traumatic mononeuropathy, root avulsions, painful polyneuropathy, central pain syndromes, postsurgical pain syndromes, and complex regional pain syndrome. Most commonly prescribed medications for neuropathic pain include antidepressants (also known as tricyclic antidepressants), anticonvulsants (also called neuroleptic medications), and anesthetics. Major antidepressants include Nortriptiline and Amitriptyline. Carbamazepine, Valproic Acid, Felbamate, Clonazepam, and Phenytoin are the most commonly used anticonvulsants for the treatment of neuropathic disorders. Major anesthetics used to reduce neuropathic pain are Tocainide or Mexiletine and Idocaine. Antidepressants and anticonvulsants are the first line of treatment for neuropathic pain. The combination of these two medications is thought to be particularly effective in the treatment of neuropathic pain.

GSM, a global system for mobile communication is a standard developed to illustrate protocols for second generation (2G) mobile phones enabled with digital cellular networks. GSM standards were launched as a substitute for the first generation (1G) analog cellular network. This was upgraded over time in order to include data communication such as circuit-switched transport and then packet data transport via GPRS (General Packet Radio Services) and EDGE (Enhanced Data rates for GSM Evolution).GSM is broadly used in wireless technology in the world. It has various applications such as jamming detection, DTMF Decoder and several network protocols. Its ultra compact size and very low power consuming property decreases the overall cost of the GSM module.

Welding is a fabrication process that joins materials, generally metals or thermoplastic, by causing coalescence. On the other hand, cutting is a process that is used to cut steel or other metals of different thicknesses using a different cutting equipments. Welding is often done by melting the work pieces and adding a filler material to form a pool of molten material that cools to become a strong joint, with pressure sometimes used and heat together, to produce the weld. Welding can be done by different methods such as gas tungsten arc welding, shielded metal arc welding, submerged arc welding and gas metal arc welding. Shielded metal arc welding is also called stick welding. It uses an electrode that has flux that protects the puddle, around it. The electrode holder holds the electrode as it slowly melts away and slag protects the weld puddle from atmospheric content. Gas tungsten arc welding is also called as tungsten inert gas and it uses a non-consumable tungsten electrode to produce the weld. Inert shielding gas such as agon or helium protects weld area from atmospheric contamination. Gas metal arc welding is also called as metal inert gas and uses a wire feeding gun that feeds wire at an adjustable speed and sprays an argon-based shielding gas and carbon dioxide over the weld puddle to protect it from atmospheric contamination. Submerged arc welding uses an automatically fed consumable electrode and a blanket of granular fusible flux. Welding and cutting equipments are mostly used by energy, automotive and construction industries. Due to the rapid industrialization demand for welding and cutting equipment has increased globally.

Based on type, electric and hybrid cars can be charged in three ways namely plug-in charging, wireless charging and battery swap. The plug in charging can be done at home through the electric vehicle supply equipment (EVSE) at home or at public EVSE stations where they have to pay for charging. In battery swap, the charged battery is swapped with the discharged one either manually or robotically from the rear of plug-in electric vehicle. Wireless car chargers are used in electric and hybrid vehicles wherein they are charged through an electromagnetic field created by an inductive pad when they are parked over it.

A cigar can be defined as any rolled bundle of dried and fermented tobacco. On the other hand cigarillos are short, narrow cigars wrapped in tobacco leaves or brown tobacco based paper. Cigarillos differ from cigar in terms of weight and size. Usually cigarillos are smaller than cigars but larger than cigarettes. Cigarillos are made without filters and are meant to be smoked like cigars. Cigarillos are machine made, which is cheaper than hand-rolling. Tobacco used in cigar is grown in large quantities in countries such as Brazil, Cameroon, Cuba, the Dominican Republic, Indonesia, Mexico, Honduras, Italy and eastern U.S. Cigars and cigarillos are available in variety of flavors in the market.

Refrigerated vehicles are used for transportation of vulnerable food, pharmaceutical and healthcare products. The increasing population and consumer spending on food products has surged their production globally. Among food products, dairy products and fresh fruits and vegetables require cold storage and transportation for their sustainability. The increasing global warming has been emerging as a matter of great concern for the food producers globally which is reducing the shelf life of these products in non-refrigerated conditions. Most of the pharmaceutical and healthcare products need protection from heat and light to maintain their chemical and biological formulation. All these concerns have been driving the refrigerated vehicles market globally and are expected to increase in terms of growth rate during 2014-2020.

The increasing automobile production and changing customer preferences in the interiors of their vehicles have been driving the automotive interior materials market. The original equipment manufacturers (OEMs) have been focusing largely on reducing the vehicle weight to increase their fuel efficiency which has been increasing their investment on the interior materials. Lighter vehicles consume less energy to accelerate as compared to their heavier counterparts. A 10% reduction in vehicle weight can increase the fuel efficiency by 6%-8%. The unstable global crude oil prices are compelling the manufacturers to develop low weight vehicles which have been creating demands for automotive interior materials market. Moreover, with the reduction in weight, the vehicles can carry additional advanced emission control systems, safety devices and integrated electronic systems without increasing its overall weight. Additionally, increasing interest of American and European user towards smart fabrics has been further adding up to benefit the automotive interior materials market.

Vero World Bazaar & Antique Mall is hosting an auction Sunday, March 8th 2015. All items in the sale may be viewed during public previews at Vero World Bazaar & Antique Mall, FL gallery, on Sunday, March 8th, 2015, 10:00 a.m.—2:00 p.m.

Hospital beds are designed to provide relief to the patient during hospitalization in hospitals. A single bed frame divided in three sections, head, middle and foot. Some of the common features of hospital beds include adjustable height of entire bed, adjustable side rails and electronic buttons to operate bed or connected electronic devices. In addition special beds, such as wheels, standing beds, turning and legacy beds, also provide comfortable hospitalization in hospitals. Some of these beds are used to treat spinal trauma patients. Hospital beds can also be divided on the basis of their usage, such as general purpose beds, birthing beds, pediatric beds and pressure relief beds. General purpose beds consists stiff board, which is used to increase the flexibility of the bed. Birthing beds used for women in pregnancy cases. Pediatric bed is an advanced type of hospital bed, which is made up of wire panted steel with mattresses holder. Pressure relief hospital beds are advanced powered mattresses, which is used to decrease the risk of ulcer from human body.

Surgical lamp is a device which is used by medical personnel, such as doctors, dentists and surgeons, during surgical procedures such as neurosurgery, dental surgery, endoscopic surgery and optical surgery. Surgical lamps provide optimal illumination for operations. Surgeons require high intensity light that do not produces shadows and gives perfect brightness so they can visualize small and low-contrast objects in body cavity during surgery. Surgical lamps are used to meet the needs of operating room from large hospitals to ambulatory surgery centers (ASCs). These lamps help doctors and surgical teams to perform their task more safely and with less stress on their eyes. There are different types are lamps that are used by the surgeons during performing surgeries, such as tungsten, xenon halogens, quartz and light emitting diodes (LEDs).

In the past few years, personal care products have become part and parcel of consumer's life. It includes array of product such as soaps, liquid soaps, hair gel, hail oil, shampoos, anti ageing face creams, sunscreen products and moisturizing lotions. Chemicals and ingredients used in personal care product ranges from basic metallic salts of fatty acids used in ordinary bath soaps to the high end cosmoceuticals that offers beautifying properties of cosmetics with useful benefits of pharmaceuticals and chemicals.

Carbon nanotubes (CNTs) are allotropes of carbon having cylindrical nanostructure. Carbon Nanotube is a tube-shaped material made up of carbon molecule, having a diameter of approximately nanometer (one-billionth of a meter or one ten-thousandth of the thickness of a human hair). Carbon nanotubes has many different structure, depending on length, thickness and type of helicity (projection of the spin on direction of momentum), and number of layers. All the carbon nanotubes are made up of similar graphite sheet. However, electrical characteristic of the carbon nanotubes (acting as metals or semiconductor) depends on the structure it exhibits. Carbon nanotubes exhibit excellent mechanical strength, comparable to graphite. Thermal and electric conductivity property of carbon nanotube can replace various materials in wide range of application such as consumer goods, electrical and electronics, energy, healthcare, automobile, aerospace, and defense sectors. Other application where carbon nanotube technology can be used as includes, conductive plastics, flat-panel displays, gas storage, batteries with improved lifetime, technical textiles, antifouling paint and micro- and nano-electronics.

Cardiac disease is a group of disorders of blood vessels and heart. Congenital heart defects, coronary artery disease and heart rhythm problems are some of the major cardiac diseases. Most common cause of heart disease is narrowing or blockage of blood vessels and coronary artery i.e. ischemic heart disease. Cardiac disease is mainly caused due to high cholesterol, smoking and high blood pressure. In addition, several other diseases such as, diabetes and obesity, and lifestyle changes such as poor nutrition, excessive alcohol and physical inactivity causes higher risk of cardiac diseases. In the U.S. heart disease is the leading cause of death in men and women. According to Centers for Disease Control and Prevention in 2010, in the U.S. approximately 600,000 people die due to heart disease. Prevention or control of heart disease is essential. Prevention from heart disease can be done by, controlling high blood pressure, lifestyle changes, lowering cholesterol, exercising and maintaining health weight. Heart disease treatment varies by condition. Cardiovascular implants have unique blood biocompatibility property, to ensure that the device is not rejected due to adverse thrombogenic or hemodynamic blood responses. There are various implantable cardiac devices such as cardiovascular stent, left ventricular assisted device, pacemakers, artificial hearts, defibrillators and vascular grafts. Pacemakers help in controlling the abnormal heart rhythm. Similarly, implantable defibrillator prevents cardiac arrest. Cardiac implant is composed of polymeric material such as hydrolytically degradable polyesters.

One of the eminent nail salons in Scottsdale has improved its Google plus page. If experts of the fields are to be believed, with the same the salon will be connecting with customers in better way.

This season CabinetDIY introduces the new and trendy modern style RTA Cabinets. As a trusted supplier for trendy, low priced quality RTA cabinets for the kitchen and bathroom area, CabinetDIY has become one of the most recommended companies in their industry. The new collection will bring style to the home where the customer has a large selection of colors and designs to choose from with the option to purchase RTA Cabinets as fully assembled or un-assembled knock-down design.

SongCat, part of Music Connect Ltd., a new company with an already impressive track record has announced exciting news and shares insights into their recent productions and clients.

The C Diff Foundation, Sponsor, with Hosts Nancy C. Caralla, Founder, Executive Director and Dr. Chandrabali Ghose, Chairperson of C Diff Foundation's Research and Development Community will be broadcasting live - delivering the most up-to-date information pertaining to a leading superbug, C. difficile, along with many other Healthcare-Associated Infections. Topic experts will be guests discussing prevention, treatments, and environmental safety products on a global level. Tune in on Tuesday, March 3rd at 11 a.m. PT (2 p.m. ET) on the VoiceAmerica network at VoiceAmerica.com (HealthWellness)