ReleaseWire

About li-ion battery for EVs

About material handling equipment

About Nano and Microsatellite

Global Enterprise Application Market - Size, Industry Analysis, Trends, Opportunities, Growth and Forecast, 2013 - 2020", the global enterprise application market is expected to reach $ 213.43 billion by 2020, registering a CAGR of 7.4% during 2014 - 2020.

Global ERP Software Market - Size, Industry Analysis, Trends, Opportunities, Growth and Forecast, 2013-2020", the global ERP software market is expected to reach $ 41.69 billion by 2020, registering a CAGR of 7.2% during 2014-2020.

Global Small Animal Imaging (In-Vivo) Market (Technology, Application and Geography) - Size, Share, Trends, Company Profiles, Demand, Insights, Analysis, Research, Report, Opportunities, Segmentation and Forecast, 2013-2020", forecasts the market to grow at a CAGR of 9.1% from 2014 to 2020. Optical imaging modality is and would continue to be the most preferred imaging technology for clinical research organizations (CROs) through 2020, largely due to high sensitivity, economic pricing and a broad scope of applications. Such factors would eventually push the optical imaging technology segment to contribute about 40% of the global small animal imaging market revenue by 2020.Rising number of pre-clinical research, increasing investments by the CROs in the research activities, growing number of multi-functional pre-clinical imaging and technological advancements, namely combination of high resolution MRI with other imaging modalities are the few factors empowering the global market. Spatial resolution multimodal imaging, Cerenkov Bioluminescence Imaging and real time storage multimodal imaging system collectively contribute to the significance of small animal imaging (in-vivo) systems in the drug development and translational research. These technologies exemplify the recent and unique advancements in the field of diagnostic devices, amplifying the scope of applications in pre-clinical as well as clinical research. However, stringent regulatory impositions coupled with inadequate reimbursement policies would restrain the market growth to a certain extent. However, faster commercialization of cost-efficient devices would ease the negative influence of restraints and fuel the market growth, primarily across the developing regions.

Disposable medical device sensors are portable scanning devices, which are mainly used for patient monitoring and diagnosis of diseases. These sensors are used to measure breathing rates, heart rates, and body temperature. Moreover, disposable medical device sensors play a vital role in the identification of disease causing microbes such as virus, bacteria, and fungi.

Infections are mainly caused by microorganisms such as bacteria, virus, and fungi. Infections are categorized into several types. Major forms of infections include Hospital Acquired Infections (HAIs), stomach and intestinal infections, common childhood infections, eye infections, ear infections, lung and respiratory infections, skin infections and sexually transmitted infections (sexually transmitted diseases).

Hyperspectral imaging is the process of collecting and processing of information across the electromagnetic spectrum. It is the combination of spectroscopy and digital imaging, implemented to create a spectral based contrast within the image. Hyperspectral images are formed with the help of an instrument called imaging spectrometer. These images are obtained at multiple wavelengths and shaped into a three-dimensional hyperspectral data cube with two spatial dimensions and one spectral dimension. Hyperspectral imaging also measures absorption of electromagnetic radiation, emission, and reflection; and provides a unique spectral signature for every pixel, used by processing techniques to identify and discriminate materials. Some of the advantages of hyperspectral imaging are the non-requirement of prior knowledge of the sample and the acquisition of entire spectrum at each point. In addition, it is an emerging imaging modality for the diagnosis of diseases and image guided surgeries. It provides extensive information for processing and analysis of the image. It also provides a continuous spectrum for each image cell and offers diagnostic information regarding tissue composition, morphology, and physiology. In addition, during the progression of the disease, the absorption, scattering, and fluorescence characteristics of the tissue change, and hyperspectral imaging helps in the diagnosis of the tissue pathology. It helps in diagnosis and treatment of diseases. It also helps improve the quality of life and reduces medical cost. It is also used in industries such as agriculture, mining, environmental monitoring, food, mining and mineralogy, military surveillance, life-science and medical diagnostics, and process vision. In the agriculture industry, hyperspectral imaging is used to monitor the development and health of crops.

Industrial explosives are blasting explosives with significant hazards, which are majorly used in construction, quarrying and mining industries. To enter into the industry, manufacturers require an explosives license to sell as well as sore industrial explosives or in some cases, they are exempted by the Explosives Act and Regulations. Various types of explosives and their accessories are manufactured in the industry such as safety fuse, detonating fuse, detonators, gun powder, nitro compound, ANFO (Ammonium nitrate – Fuel Oil) based explosives, cartridge explosives, bulk explosives and nitrate mixtures. Asia Pacific dominated the global industrial explosives market in terms of production with more than 30 key players involved in industrial explosives industry. Some of them include Indian Oil Corporation, Hubei Kailong Chemical Group Co., and Solar Industries India Limited among others. Europe accounts for the second largest manufacturer for industrial explosives, followed by North America, particularly United States and Canada.

Nitrogen is an odorless, colorless chemical element which is a source of raw material in various important industrial compounds such as nitric acid, ammonia, and cyanides. It occurs in majority of the organisms, primarily amino acids such as proteins, and nucleic acids (RNA and DNA). Nitrogen is widely used as fertilizers where synthetically manufactured nitrates and ammonia are some of the vital industrial fertilizers used in the agrochemical industry. Other than fertilizers, nitrogen compounds are versatile organics used in industrial applications, developing Kevlar fabric and pharmaceutical drugs such as antibiotics.

Palladium is a lustrous silvery-white rare metal used in a diverse range of applications. The metal with other elements such as osmium, iridium, ruthenium, rhodium, and platinum are referred to as Platinum Group Metals (PGM). Palladium is majorly consumed in the automotive industry as catalytic converters, manufacturing of electronics and jewelry, as well as chemical and dental applications. Palladium is sourced from two major sources, viz., mine production and recycling.

Precious metals are naturally occurring rare metallic elements having significant economic value. They have high luster, usually ductile which tend to be less reactive than most elements. Precious metals are primarily regarded as investments and industrial commodities. Platinum group metals and gold are some of the most prominent precious metals present in the industry. While the coinage metals, silver and gold are consumed in industrial applications, they are better known for their use in jewellery and art. Other precious metals include the platinum group metals: iridium, osmium, rhodium, ruthenium, palladium and platinum.

Recycled plastics are materials which go under the process of recovering waste plastic and reprocessing the material into useful products. In some cases, these finished products tend to be different in form from their original state. These plastics are also recycled during the production of plastic goods such as polyethylene bags and films. A part of these plastics is then bought into the main production operation. This trend has been practiced since the past few decades which have led to the production of certain plastic products amongst the most efficient operations. The global demand for plastic recycling has been rapidly growing over the past few years, where primary consumers of plastic packaging have started incorporating various recycled plastics in their products as part of the increasing focus towards recycling. Moreover, the industry for recycled plastics has been on the rise as prices for two of the major recycled plastics high density polyethylene (HDPE) and polyethylene terephthalate (PET) continue to hold significant value in the overall plastic industry.

Composites contain high-performance fibers such as carbon or glass, and a matrix material. When used in vehicles, composite materials make them lighter, safer, and fuel efficient. Increasing demand for fuel efficient cars has been propelling the automotive composites market. Volatile crude oil prices and rising petroleum based fuel prices are boosting the growth of fuel efficient vehicles. Composites weigh about one-fifth of steel, however they are better than steel in terms of strength. Unlike steel and aluminum, composites do not rust or corrode. Additionally, composites significantly increase the fuel economy of the vehicle by reducing its overall weight by approximately 60%. The strength-to-weight and stiffness-to-weight ratio of the vehicle increases with the use of composite materials. The vehicle also achieves a high energy-absorbing capability per unit mass by using composite materials.

Electronic adhesives are a part of the electronic components used in the manufacture and assembly of electronic circuits and products. They are mainly used in wire tacking, binding the surface-mount components, and encapsulating components. Raw materials used in the production of electronic adhesives include silicones, epoxies, polysulfides, polyurethanes, and cyanoacrylates.

Hematology, a branch of medicine, deals with the prevention, diagnosis, and treatment of blood diseases. It includes problems associated with red blood cells (RBCs), white blood cells (WBCs), platelets, bone marrow, blood vessels, spleen, lymph nodes, and proteins involved in bleeding and clotting processes. People can be affected by many different types of blood disorders. Major blood disorders that affect people include anemia, bleeding disorders, and blood cancer. Hemophilia and thrombosis are the most common types of bleeding disorders. Leukemia, lymphoma, and myeloma are the major types of blood cancer. Leukemia is caused by the rapid production of abnormal WBCs, and occurs in the blood and bone marrow. It is mainly classified as chronic myeloid leukemia, acute myeloid leukemia, acute lymphocytic leukemia, and chronic lymphocytic leukemia. Lymphoma affects the lymphatic system of the human body. Hodgkin lymphoma and non-Hodgkin lymphoma are the common types of lymphoma. Myeloma specifically affects plasma cells. Myeloma is mainly classified as multiple myeloma and myelodysplastic syndrome.

An ulcer is a break in the skin due to loss or degeneration of the surface tissue. Mouth ulcer refers to an ulcer that appears on the mucous membrane of the oral cavity. There are various types of mouth ulcers such as minor ulcers (diameter of around 2-8mm), major ulcers (bigger and deeper than minor ulcers), and herpetiform ulcers (a cluster of dozens of smaller sores). Some of the common causes of mouth ulcers are stress or tissue injury, excessive consumption of citric food such as lemons, oranges, apples, and others, impaired immune problems, and nutritional problems. Mouth ulcers can be prevented by avoiding tissue injury, keeping away from food that causes irritation in the mouth and maintaining oral hygiene. Apart from traditional methods, various drugs are used to treat mouth ulcers. Some of the major classes of drugs used to treat mouth ulcers are corticosteroids, analgesics, anesthetics, antihistamines, and antimicrobials. On the basis of the type of product, the global market for mouth ulcers treatment can be classified as mouthwashes, gels, sprays, and lozenges. Based on the indication, the market can be classified as aphthous stomatitis, oral lichen planus, and others.

Colorectal cancer is a malignant tumor on the inner wall of the large intestine. This is due to the abnormal growth of cells which have the ability to invade or spread to other parts of the body. The common causes of colorectal cancer are inflammatory bowel disease and genetic inheritance. The common symptoms of colorectal cancer include fatigue, diarrhea or constipation, shortness of breath, weakness, change in bowel habits, red or dark blood in stool, cramps, narrow stools, weight loss, abdominal pain, and bloating. These symptoms may develop several years after the formation of the tumor. Various stages for colorectal cancer are: stage 0, cancer in very early stages present in the innermost layer of the intestine; stage I, cancer present in the inner layers of colon; stage II, cancer spreads through muscle wall of colon; stage III, cancer spreads to lymph nodes, stage IV, cancer spreads to other organs. Some of the drugs in the pipeline for colorectal cancer therapeutics are Lonsurf, CYRAMZA (ramucirumab), TS-1/Teysuno, CPP-1X (eflornithine hydrochloride), MelCancerVac, Xilonix, and Nintedanib. There are various medications such as chemotherapy drugs, immunotherapy, and leucovorin (chemoprotectant) that can be used to treat colorectal cancer. Chemotherapy drugs for the treatment of colorectal cancer include antimetabolities such as fluorouracil and capecitabine. Monoclonal antibodies used in immunotherapy as part of the treatment of colorectal cancer are bevacizumab, cetuximab, and panitumumab.

A wide range of composites are used in aerospace industry. Commercial aircrafts, defense aircrafts, helicopters, launchers and engines are made-up of composites. Aerospace composites help to lighten the weight of the components and increase the efficiency of the engines. Aerospace composites help in weight reduction subsequently decreasing the fuel consumption. Low weight and durability of components are of huge importance in aerospace and aircraft industry. The market for aerospace composites is classified as: carbon fiber reinforced composites, glass fiber reinforced composites, metal matrix composites, foam core materials and ceramic matrix composites among others. Aerospace composites are used in interiors as well as exterior of the aircrafts. In addition, to this ceramic matrix composites are used in manufacturing of engines, which sustains at higher temperatures. Moreover, aerospace composites provides various characteristics to the components such as fire resistance, durability, flexibility and lighter weight among others.

A smart grid sensor is a small and lightweight node that serves as a detection station in a sensor network. Smart grid sensors enable the remote monitoring of equipment such as transformers and power lines, and the demand-side management of resources on an energy smart grid. Smart grid sensors are generally used to monitor weather conditions and power line temperature, which can then be used to calculate the line's carrying capacity. This process, known as dynamic line rating, helps in increasing the power flow of existing transmission lines for power companies. A smart grid sensor can also be used within homes and businesses to increase energy efficiency. A smart grid sensor can be of four types: microcomputer, transducer, power source, and transceiver .

Web Design Beast recently announced an amazing pricing structure for all their services. The discount comes just in time for the New Year and gives clients the same expert service at a lower price. Web Design Beast is one of the few companies that actually posts its pricing structure, so this announcement is in keeping with the firm's commitment to bringing the best value to its clients. According to a company spokesperson, "The new pricing structure will last through the end of this year and is our way of giving back to the clients who make us successful."

USA, Century 21 Bright Horizons Mine Brokerage Division - For investors seeking the ultimate opportunity for major returns on some of the continent's finest mining claims, they should look no further than Mineinvest.com, this online listing site is supported by the Mine Brokerage Division of Century 21.

Out of the Comfort Zone features renowned expert on handling conflict Craig E. Runde. He will speak to program host Dr. Wanda Wallace about learning to manage conflict in the workplace tomorrow at 2 p.m. ET on Voice America.

The report on the global feed enzymes market meticulously studies the dynamics of this industry with respect to market trends, forecasts, and growth inhibitors and impellers. The report takes a close look at the feed enzymes market of the future to help market participants brace for change. The demand-supply dynamics are measured using accurate and reliable tools, thus enabling our analysts to offer a bird's eye view of the global market for feed enzymes.